Intercooler piping is complete!

-
The last intercooler pipe was finally finished. Dad had one of the neighbors come over and weld it up, along with the last weld on the intercooler and the water neck. So now the car can start going back together for its first startup!

Inlets to the intercooler from both turbos

modified water neck

Back side of the dual inlets

(Pain in the Ass) discharge pipe from drivers side turbo

Another view of the PITA pipe

Intercooler outlet to carb

Water neck, PITA pipe, and drivers side turbo

Water neck, PITA pipe, and drivers side turbo

Also, the fuel pump and pump controller have been wired up!

Aeromotive 1600 fuel pump

Battery box and fuel pump controller

Aeromotive fuel pump controller



Comments

Post a Comment

Popular posts from this blog

2023 mid-year update

-
Image
I have done quite a lot in the time since my last post. Electrical, electronics, interior, lighting, and more. I did get the LT4 completely installed and running, and it runs  extremely  well. It also gets 25-27 mpg while cruising on the freeway, which is just astounding. LT4 and 8L90e installed and functional Shortly after I got the LT4 swap completed, I needed to replace the headlights because I simply could not see anything after dark, which made for one rather stressful drive home one night. So lets start out with:
Read more

Time for an upgrade

-
Image
There have been a few updates we've made to the car recently that are turning out pretty nice.  First off, while driving home from a friend's house, I noticed a bit of a whine that only occurred under load. Along with this whine, I noticed that the car was not making much boost at all. Once I got home, I inspected the turbos to find this: The turbos we bought 7 years ago have decided to sacrifice their bearings to the gods. These were just cheap turbos we got off of eBay, and I really only expected to get ~10k miles out of them. Sadly, they made it about 2,500 miles before giving me the finger. So, I'll introduce you to the latest addition to our family: twin VS Racing billet 72/65's! These new turbos are configured a bit differently than the old ones. Despite having a larger compressor, I configured them with smaller exhaust housings. The old turbos were ar .86, these new ones are ar .68. This should bring a noticeable reduction in turbo lag.  There is quite a differen
Read more

I was going to do some welding today, but. ....

-
Image
Well I had planned on working on the nova today and finish welding up the AC/Heater patch panel on the firewall and maybe even some intercooler piping, but we had a bit of an accident at grandma's house after luca's baseball game. Grandma was pulling some tools out of her shed for me too take home, when we hear a bang and Riley crying. Riley comes around the corner and his shirt and entire right side of his face is covered in blood.  Apparently he was chasing Luca around the living room and ended up running directly into the door frame of the kitchen, which has no moulding. The corner of the sir frame hit him right above his right eye, splitting it open all the way down to the skull. So needless to say we rushed him to the ER. After the initial shock of being hurt, Riley returned back to his normal, hyper self. He had blood running down his face but wanted nothing more than to get down and chase Luca around the ER and play with all of the neat medical instruments. The only ti
Read more